AST DPP10 bearing,DPP10 Deep Groove Ball Bearings--BEARINGPOWER Co.,Ltd.
HOME -- AST bearing -- Deep Groove Ball Bearings -- AST DPP10 bearing

(dimensions in inches)

Bearing Type - DPPxx

Bore Dia (d) - 0.6250

Outer Dia (D) - 1.9375

Outer Width (Bo) - 0.9200

Inner Width (Bi) - 0.9950

Dynamic Load Rating (Cr) - 13,100

Static Load Rating (Cor) - 28,400

Max. Shaft Shoulder Dia. Inner (Li) - 0.9

Ball Qty - 24

Ball Dia (Dw) - 0.3430

Max. shaft corner radius, or 45 deg. chamfer (ch1) - 0.015

Max. housing corner radius, or 45 deg. chamfer (ch) - 0.044

Material - 52100 Chrome steel or equivalent

The dynamic load rating given is for outer race rotation. The dynamic load rating for inner race rotation is 15300 pounds.

The static thrust load rating is 9400 pounds.

The bore diameter tolerance is +.0000 / -.0005".

The outside diameter tolerance is +.0000" / -.0005".

The tolerance for the inner race width and the outer race width is +.000" / -.005"

The load ratings listed for these bearings are determined by the formulas used specifically for airframe bearings. These ratings are not equivalent to ratings calculated from the ABMA formulas used for most antifriction bearing products.

This bearing is intended for commercial applications. You must notify the AST sales department contact at the time of your inquiry if the bearing will be used in an airworthy application.

The bearing has two removable seals made of woven fabric Teflon.

Purchase the AST DPP10 Please fill in the following

Title:

Email:

Tel:

Content:

Verification code:

Hot number:NSK 28TM07ANX CYSD 6008-RS NTN 6310LLUNR SKF 7052BGM ISO GE160DO-2RS Samick LMKM8 NTN NU3234 SKF QJ206MA NTN R7207 INA NA4864 STEYR MB-20 MRC 121-KSF MRC 1316 RHP EN16 CONSOLIDATED NN-3038-KMSP/5 CX 1309 NACHI 45TAB07 ZEN 62300-2RS NTN 682 NTN 7096 Timken 766/752D FAG 803646 CX BK4512 INA EGB5020-E40 INA GE180-DO-2RS NTN NJ29/710 NKE NU2307-E-TVP3 CX NU332 E FAG EW-5/16 CONSOLIDATED SAF-230