CONSOLIDATED MR-22-2RS bearing,MR-22-2RS NEEDLE BEARINGS --BEARINGPOWER Co.,Ltd.
HOME -- CONSOLIDATED bearing -- NEEDLE BEARINGS -- CONSOLIDATED MR-22-2RS bearing
Dimensions (inch)F1.3750

Without Inner Race & 2 Seals 2RS

D1.8750
B1.2500
Approx.
Wgt. lbs
.410
Appropriate Inner RaceMI-18
InterchangeMcGillMR-22-SS
RBCSJ-7255-SS
TorringtonHJ-223020-2RS
1) Material - Outer races, inner races and rollers are made from 52100 steel and hardened to Rockwell hardness 60-64 RC. These bearings are equipped with stamped steel cages.
2) Lubrication - Outer races have an external centered oil groove and one oil hole. Inner races have an internal centered oil groove and one oil hole.
3) For applications where the bearing is run directly on the shaft, no inner race is required. The shafthardness should be 60 Rockwell C scale.
4) In order to adapt the seals, a narrow roller is used. Therefore, the load ratings are equivalent to the narrow type - i.e. MR-16-2RS load equal to MR-16 N.
Purchase the CONSOLIDATED MR-22-2RS Please fill in the following

Title:

Email:

Tel:

Content:

Verification code:

Hot number:NSK 6318VV NTN 7305DB INA FTO3 AST GAC28S IKO KT 606820 NSK MF128ZZ1 TMB PSL 512-304 CYSD R16-ZZ Timken WJ-333916 SKF VKHB 2175 FAF A206K RIV LR25 BERLISS 94322 STEYR 7226BAGM CONSOLIDATED 16013 Timken 07100D/07204 NTN 120BA-16 NACHI 23934AXK ISO 322/28 NTN 51332 ISB 7318 B NSK B15-69T12DDWNCXCM Fersa F18047 NBS K 16x22x16 SKF NCF28/500V ISO NNU6026 NTN W68/2,5ZA CONSOLIDATED F-692 CONSOLIDATED 32972 CONSOLIDATED SN-228..23228